Ergonomic Equipment
PalletPal Automatic
Virtually eliminate lifting, bending, and stretching the primary causes of back injury. This simple, automatic unit is ideal for most applications. It incorporates a turntable to allow nearside loading and a system of springs and shock absorbers which lower and raise the unit, as pallets are built up and broken down, to maintain a constant working height. No power or air supply is required. Pallet loads to 4,500 lbs can be handled. Rugged tubular steel frame for loads to 4500 lbs. Heavy-duty springs calibrated to bring pallet to most convenient loading and unloading height. Proven linkage design maintains level under uneven loading. Dampener provides smooth, gradual raising and lowering action without overshoot or spring bounce. Low-friction bearing- supported turntable for near-side loading and unloading. Phenolic frame cover (optional). Fork pockets for relocation by fork truck also extend base for free standing stability Leveling feet (optional) allow use on sloping or uneven floors. Free standing, can be easily relocated by fork truck.
| PalletPal Mech |
420 |
4500 |
9.5 |
18.5 |
28 |
$1900-2100 |
PalletPal Airbag
Designed for use where pallet loads vary widely and are changed frequently. The airbag spring combination provides virtually linear response, and the spring provides a measure of safety by supporting the unloaded turntable in the event of accidental air loss from the airbag. Fittings and tubing are simple with only two connections. The unit is equipped with fork pockets for easy relocation and to provide a stable base that does not require lagging. Load range to 4,500 lbs. Full guarded easily accessible air outlet and gage Air bag fully protected in down position Phenolic frame cover (optional). Low-friction, bearing-supported turntable for near-side loading and unloading Permanent spring combines with air bag to provide linear response Rugged lift table type frame for loads to 4500 lbs Simple connectors and tubing Fork pockets for relocation by fork truck also extend base for free standing stability.
| PalletPal Air |
615 |
4500 |
9.5 |
21 |
30.5 |
$2140 |
PalletPal Powered-Hydraulic
When loads, weights, pallet sizes or product dimensions vary greatly, a Powered PalletPal with total operator control is the solution. A foot control allows the operator to adjust the load to an infinite number of positions up to 32.75" (plus pallet), so it is always at the most comfortable height for loading and unloading. The manual turntable allows quick and easy rotation of the load so that the operator is always working on the near side, eliminating reaching, stretching and walking around. Built-in fork pockets provide both ease of portability and additional stability. The Powered PalletPal Hydraulic works on standard 115V power and is available in 2,000 and 4,000 lb. capacities. Best used with non-uniform loads (mixed product sizes).
| PPH2-24 |
700 |
2000 |
8.75 |
32.75 |
115/1/60 |
$3735 |
| PPH4-24 |
760 |
4000 |
8.75 |
32.75 |
115/1/60 |
$4225 |
PalletPal Powered-Pneumatic
The Powered-Pneumatic PalletPal has all the features of our hydraulic unit but operates on shop air. A heavy-duty airbag positions pallet loads weighing up to 4,000 lbs, with as little as 80 psi. These airbag actuated machines are dedicated to pallet positioning applications. The capacity denotes the maximum weight of the fully loaded pallet that is appropriate for each model. The unit features a shock absorber style load dampener to dramatically reduce "bounce" which is common in many other pneumatic lift devices. This model alsoincludes built-in fork pockets to provide both ease of portability and additional stability. Pneumatic foot-valve positions the load at any height within the unit's working range. Foot control positions the load at any height within the unit's working range. Best used with non-uniform loads (mixed product sizes).
| PPA2-24 |
640 |
2000 |
9.5 |
33.5 |
80psi |
$3735 |
PalletPal Lift Truck
If you use open bottom pallets or skids, now you can transport and palletize with a single unit. The original high lifting pallet truck for transporting and positioning unit loads to the most comfortable and convenient working height. Loads can be adjusted up and down at the touch of a button or the unit can be equipped with an optional "level eye" for auto leveling. The PalletPal Lift Truck has great maneuverability in narrow aisles and minimum reach-over when using open bottom skids or pallets. Fork width available at 20.5" or 27".
PalletPal Lift Trucks are ideal for machine feeding and offloading, load unitizing/palletizing, transporting loads to and from assembly and staging areas or as adjustable height workstations. The Electric Model features a 12 Volt Pump, Battery, and comes with 115V battery charger.
- Lifts Loads to 31.5"
- Lowers to 3.5"
- Patented stabilizers prevent movement when raised
- Overload control
- 2,200 pound capacity
- Multiple fork lengths and widths (Consult Factory)
- Hose rupture control
- Discharge indicator
- Tool free battery disconnect
| PT-33-E |
375 |
3300 |
45" fork length |
3.5 |
31.5 |
12V DC |
$3740 |
PalletPal Mobile Leveler
Perform multiple functions with one versatile machine. Used by itself as a mobile pallet positioner or as the perfect companion to your PalletPal, the mobile leveler can deliver and remove loads quickly and easily without the expense of a ride-on fork truck. The straddle design accepts any pallet or skid. One PalletPal Mobile Leveler can feed multiple PalletPals. Comes with 115V battery charger and is available with automatic load leveling eye. For use with skids and open or closed bottom pallets up to 40" wide. Adjustable fork width from 14" to 31".
| PMLS-30-ME |
730 |
3000 |
42" fork length |
1.5 |
34 |
12V DC |
$5039 |
PalletPal Disc Turntable
Low-profile design, less than 1" high, allows PalletPal Disc Turntables to accept a hand pallet jack. By rotating the load, the operator always works from the nearside without walking around the pallet. The risk of injury from reaching or stretching is virtually eliminated. The turntable is totally portable and can be easily moved throughout the plant.
| PalletPal Disc Turntable |
250 |
4000 |
$980 |
Roll-On Level Loader
The Roll-On Level Loader lowers to floor height so pallets can be rolled on with a hand pallet truck. The operator can adjust the height of the pallet to allow loading or unloading at the most convenient working height with a minimum of lifting. Narrow side panels virtually eliminate reach-over while providing operator protection.
| ROLLC2.5-28 |
1350 |
2500 |
52x48 |
0.375 |
28.375 |
1 |
115/1/60 |
$5585 |
| ROLLC2.5-28 |
1350 |
2500 |
40x48 |
0.375 |
28.375 |
1 |
115/1/60 |
$5585 |
| ROLLC2.5-28 |
1485 |
2500 |
44x48 |
0.375 |
28.375 |
1 |
115/1/60 |
$5055 |
| ROLLC4-28 |
1650 |
4000 |
52x48 |
0.375 |
28.375 |
1 |
115/1/60 |
$8040 |
| ROLLC4-28 |
1650 |
4000 |
44x48 |
0.375 |
28.375 |
1 |
115/1/60 |
$7305 |
| ROLLC4-28 |
1650 |
4000 |
40x48 |
0.375 |
28.375 |
1 |
115/1/60 |
$8040 |
Roll-On Level Loader w/Turntable
For even greater convenience, the Roll-On Level Loader is now available with a built-in, hand pallet truck accessible 360° turntable with internal hydraulic power. The lift is easily adjusted by pushbutton or foot switch control to maintain an ideal height for manual loading and unloading. Available with One Touch Auto Leveling that allows the operator to "dial-in" the exact increment of travel for loading or unloading. It will also return the platform to full height (or to fully lowered position) at "one touch of the button".
| ROLLC3-28 |
2400 |
2500 |
44x48 |
2 |
30 |
115/1/60 |
$11,910 |
PalletPal Rotator
With the ability to handle pallet loads measuring up to 48" x 48" x 60" high, the Southworth PalletPal Pallet Inverter is a simple, rugged machine designed to invert entire pallet loads. The pressure adjustable clamping mechanism easily secures loads up to 4,400 pounds and rotates them 180 degrees on a massive anti-friction turret bearing. Here are just a few uses:
- Replace broken pallets
- Switch loads to/from in-house or shipping pallets
- Transfer from pallets to slip sheets
- Replace damaged goods at the bottom of the load
| SR44-60 |
4000 |
3500 |
460/3/60 |
$27,410 |
| SR44-72 |
4400 |
3500 |
460/3/60 |
$31,520 |
| SR44-84 |
4800 |
3500 |
460/3/60 |
$34,475 |
PalletPal Stretch Wrapper
Hand-wrapping is dangerous. An inexpensive alternative, the PalletPal Stretch Wrapper incorporates a low-profile powered disc turntable and a stationary mast assembly. Simply wheel a loaded pallet onto the disc and move the stretch wrapping wand up and down the mast as the powered turntable spins the load.
| PalletPal
Stretch Wrapper |
770 |
2500 |
48.5x90.5 |
115/1/60 |
$4,850 - $5,300 |
Stainless Steel PalletPal
Stainless steel spring-actuated PalletPal is ideal for most applications. With inherent stability and no power sources or connections, the fully automated mechanical PalletPal is virtually maintenance-free. The turntable is easily rotated even when fully loaded and allows for near-side loading and unloading (the faster, safer and easier way) without walking around the unit.
| Stainless PalletPal Mechanical |
615 |
400 - 4500 |
9 1/2 |
20 1/2 |
28 |
$4895 |
products